For whatever reason I’ve not had a lot of luck limiting TDP with almost any game… I’ll need to sit down and really test shit out at some point. I haven’t even messed with the default settings on CB yet so there’s likely performance gains to be had there - it’s just that in other Godot games I’ve messed around with I couldn’t get them running much better. There is that one 3D graphics shooter game (think kinda like the old 1944 NES game or whatever) that was not graphically impressive but used more power than flippin’ Metal Gear Solid 5…. Like WHAT
I’ve found I can cap the TDP on several games without any noticeable change in performance. The important part is to remember that you set a cap, if you start getting FPS drops in another part of the game. It sucks to have a game performing poorly, and not remember that you set a TDP limit when you tried the game out months ago.
There are also some games that have bugged cpu or gpu clock speed, where the game will run one at max clock speed unnecessarily causing extra power drain and performance issues (for example the CPU may be using too much power and staving the GPU, even though the CPU doesn’t need to be running at max speed). For capping cpu you have to use the decky plugin power tools or another method.
Checking on ProtonDB is a good place to look for recommended performance tweaks, looks like a lot of reviews there mention capping Cassette Beasts at 10 TDP, and a couple more mention capping the GPU speed at 800.
I’ve capped it at 8w now with decent results. Still gets warmer than I feel it should but it’s a lot better.
I dont use per game profiles at all, so forgetting a cap on isn’t an issue for me. I just manually change settings each time to match the game im playing hahaha. But I am a nerdy dork who loves to tinker so the tedium in doing that is actually pretty satisfying for me.
I’ve experienced similar in 2D games that are more or less fancy Flash games. I wonder if that has less to do with Godot (it might, anyway) and more to do with optimization and LOD.
Either way, I still appreciate the heads up that it’s battery intensive. Good to know before traveling and winding up searching for an outlet.
It’s likely more to do with optimazion (or lack thereof) mostly on the game devs side of things - but I think Godot has a lot of room for improvement in that regard as well. BUT take that with a grain of salt I could be wrong!
Anyway I set CB to 8w and it plays at 60 fps mostly, and the deck is much cooler and less battery intensive. Dropping the games graphics and limiting to 30 fps would probably be a good idea for this game if longer battery is gonna be needed. Cheers!
For whatever reason I’ve not had a lot of luck limiting TDP with almost any game… I’ll need to sit down and really test shit out at some point. I haven’t even messed with the default settings on CB yet so there’s likely performance gains to be had there - it’s just that in other Godot games I’ve messed around with I couldn’t get them running much better. There is that one 3D graphics shooter game (think kinda like the old 1944 NES game or whatever) that was not graphically impressive but used more power than flippin’ Metal Gear Solid 5…. Like WHAT
I’ve found I can cap the TDP on several games without any noticeable change in performance. The important part is to remember that you set a cap, if you start getting FPS drops in another part of the game. It sucks to have a game performing poorly, and not remember that you set a TDP limit when you tried the game out months ago.
There are also some games that have bugged cpu or gpu clock speed, where the game will run one at max clock speed unnecessarily causing extra power drain and performance issues (for example the CPU may be using too much power and staving the GPU, even though the CPU doesn’t need to be running at max speed). For capping cpu you have to use the decky plugin power tools or another method.
Checking on ProtonDB is a good place to look for recommended performance tweaks, looks like a lot of reviews there mention capping Cassette Beasts at 10 TDP, and a couple more mention capping the GPU speed at 800.
I’ve capped it at 8w now with decent results. Still gets warmer than I feel it should but it’s a lot better.
I dont use per game profiles at all, so forgetting a cap on isn’t an issue for me. I just manually change settings each time to match the game im playing hahaha. But I am a nerdy dork who loves to tinker so the tedium in doing that is actually pretty satisfying for me.
I’ve experienced similar in 2D games that are more or less fancy Flash games. I wonder if that has less to do with Godot (it might, anyway) and more to do with optimization and LOD.
Either way, I still appreciate the heads up that it’s battery intensive. Good to know before traveling and winding up searching for an outlet.
It’s likely more to do with optimazion (or lack thereof) mostly on the game devs side of things - but I think Godot has a lot of room for improvement in that regard as well. BUT take that with a grain of salt I could be wrong!
Anyway I set CB to 8w and it plays at 60 fps mostly, and the deck is much cooler and less battery intensive. Dropping the games graphics and limiting to 30 fps would probably be a good idea for this game if longer battery is gonna be needed. Cheers!