Who gives a crap what UHC is looking for?

The “Free Speech Absolutist” strikes sues again.

You might as well put their Customer Service number in your phone now. If your experience is anything like mine you’ll be spending lots of time talking to shouting at them.

IMO when dealing with corporations, after they’ve been notified once of a problem like yours, any others that happen because they haven’t fixed their systems are clearly active malice. It is almost certain they’ve been notified of this kind of problem many, many times. It is also almost certain UHC hasn’t fixed anything at all.

Corporations are legal persons but our society and government consistently hold them far lower standards than real persons face. They literally murder but don’t face jeopardy from criminal laws, poison people and are met with a slap on the wrist, and enrich themselves while paying only a small fraction of their illegal profits in fines when they’re caught. Can you imagine the penalties if you or I did these things?

The world would be a far better place if UHC was held to the same standards as the people they insure.

United Heath would routinely deny payment for the entire visit if my doctor did anything besides look at the initial issue during an appointment. Let’s say I was there for ear pain and my doc said I was due for a vaccination, UHC would deny payment for everything. Since making a second appointment for the vaccination was far more expensive, the only possible reason for this was that a certain percentage of people would pay the bill and United Health could just steal from them and pocket the money.

I spent many hours on the phone after doctor visits demanding they pay the bills as my policy’s contract required. I wonder how much the UHC crooks made because of the people who just paid the doctor bills and UHC was able to steal money they didn’t earn?

United Health Sucks.

Yes for both of my refrigerator sensors. There’s a concrete floor and multiple concrete walls between one of the sensors and the hub and it still works perfectly.

“NaziAI” has a real ring to it.

If you’ve not ordered from Aliexpress be aware their website is set up to display deep discounts for first time orders by default. Once you log in after your first order the discounts disappear and the prices are much higher.

Pretty crappy business practices, but when a product is 1/4 the price of buying locally, still hard to pass up. For $4 a pop I put leak sensors under every sink and toilet in the house. At the time they were $17 each on Amazon. Also be aware it is very easy to buy a wifi version instead of Zigbee because of the way the website is set up. Many Tuya wifi devices require always on Internet access.

I’m in the U.S. and it’s $4-$5. Free shipping with a $10 purchase. Surprised it’s so much more in the E.U.

A friend just had her Windows 11 PC hijacked and used to drain money from her bank account. Not too much of a worry with Linux of any flavor.

It took 5x as long to wipe the disk and reload Windows as it would have to load Linux, plus another hour to change the settings to turn off as much of of Window’s advertising and spyware as possible. Microsoft will no doubt change the settings back when Windows update runs, or maybe they’ll just pile on more ads.

I’d much rather deal with some hardware incompatibilities than Microsoft’s bullshit.

It’s this one: https://www.aliexpress.us/item/3256805942369090.html?gatewayAdapt=glo2usa

One of my main goals when setting up home automation was making sure the devices I’m using do not need cloud access. The only exception is an old Honeywell thermostat that I’ll replace eventually. Everything else, including security camera occupancy detection continues to work if the Internet goes down.

My router only has one open port and that’s for Wireguard. It’s set to a random port number and appears closed to external scanners so I believe my network security is reasonably good. Devices that like to connect to external servers like TP-Link cameras and bulbs are blocked by the router’s firewall.

For occasional external access I use Tasker to detect what network I’m on and then automatically connect to Wireguard when away from home. After the WG tunnel’s up it starts Home Assistant Companion. It’s not as seamless as Home Assistant Cloud, but for occasional use it’s fine.

Warning about Home Assistant: It’s ridiculously addictive. It is also so flexible that I’ve been able to implement almost anything that comes to mind and ended up with more sensors and automations than I ever thought I’d use.

Linux Mint is an excellent choice for both new and experienced users. After distro-hopping for years I went back to Mint because it works on my hardware with very few problems and I was tired of troubleshooting other distros odd problems. I haven’t used Mint on a Go 2, but I have used the full version with Cinnamon Desktop on a Dell Venue with similar hardware restrictions and currently run Mint on a Surface Laptop 4.

As to whether the Go 2 will work for your uses, the Venue had 4GB of memory and a 128GB SSD and worked fine for simple spreadsheets, word processing, web browsing, email and as an ebook reader. It was used daily for 1-3 hours for 7 years. Even after cracking the screen I was able to run Debian 12 and Home Assistant on it for almost a year more. A Micro SD was great for extra storage, but was far too slow for running an OS IMO. Despite the daily use and running a Swap file, I did not have any SSD problems in almost 8 years of use. It still works and if it weren’t for the cracked screen I’d probably still be using it.

Because of the limited memory I used Zram. Once set up it’s completely transparent and Mint is noticeably faster when running multiple apps. The 128GB SSD was big enough as long as I was careful with downloads and moved large, little used files to the Micro SD. No problems 99% of the time with the processing power.

I now use a Surface Laptop 4 with Mint. The Linux Surface Github page provided the info and procedures needed to set it up. An external USB keyboard and mouse were required for installation because the keyboard and trackpad would not work until the Surface kernel was installed. It works perfectly after installation and configuration.

Libreoffice Draw works as a PDF editor and does what you’re looking for. No experience with Linux note taking apps or a stylus.

Seems to be. It reads within 1 degree of a digital refrigerator thermometer.

I use the round version of the same Tuya temperature sensor in my refrigerator and with Home Assistant. For $4 I wouldn’t hesitate trying one in a protected area outside. As long as it’s not directly exposed to rain or sun it’ll probably work fine.